Winches - Heavy Duty Trailer
SpanSet Heavy Duty Trailer Winches are designed for rugged use, making SpanSet winches excellent choices for the
heavy transportation.
Weld-On Webbing Winches – Fixed Position, Permanently Mounted
|
8110
Features
- · Standard weld-on fixed bottom mount winch
- · Fully slotted mandrel
- · Designed for use with 3" and 4" webbing
- · Holds approx. 30 ft. of webbing
|
|
8310
Features
- · Low Profile weld-on fixed side mount winch
- · Fully slotted mandrel
- · Designed for use with 3" and 4" webbing
- · Holds approx. 20 ft. of webbing
|
Portable Webbing Winches – Flexible Mounting on Side Channel
|
8120
Features
- · Standard portable mount winch using 2 set screws
- · Fully slotted mandrel
- · Designed for use with 3" and 4" webbing
- · Holds approx. 30 ft. of webbing
|
|
8320
Features
- · Low Profile portable side mount winch using 1 set screw
- · Fully slotted mandrel
- · Designed for use with 3" and 4" webbing
- · Holds approx. 20 ft. of webbing
|
CAUTION: Do not over tighten bolts. This will bend the bracket and may cause the
winch to fail.
Spool Type/Weld-On Webbing Winches – Fixed Mount
|
8212
Features
- · Fully slotted mandrel
- · Designed for use with 2" webbing
- · Holds approx. 40 ft. of webbing
- · Side plates for webbing protection
- For 3" webbing order: 8213
|
|
8214
Features
- · Fully slotted mandrel
- · Designed for use with 4" webbing
- · Holds approx. 40 ft. of webbing
- · Side plates for webbing protection
|
Sliding Webbing Winches – Slider Track or Fixed Mount
|
8150
Features
- · Low Profile notched frame winch
- · Fully slotted mandrel
- · May be used as weld-on
- · Holds approx. 20 ft. of webbing when used as slider
|
|
8250/8210
Features
- · High Profile notched frame winch
- · Fully slotted mandrel
- · May be used as high storage capacity weld-on
- · Holds approx. 30 ft. of webbing
|
Weld-On Cable Winch – Fixed Mount
|
8111
Features
- · 1/2" dia. steel pin for use with cable
- · Weld-on winch
|
Weld-On Webbing & Cable Combination Winch – Fixed Mount
|
8115
Features
- · Fully slotted mandrel
- · Designed for use with 2"-4" webbing
- · 1/2" dia. steel pin for use with cable
- · Hold approx. 30 ft. of webbing
|